Welcome to Zhisheng‘s official website!
+86 191-6892-5687
+86 191-6892-5687
Zhisheng
Your Position:Home > Product Center > Oven series >
Recommended
Contact Us

Zhisheng

Zhisheng Automation Equipment (Shenzhen) Co., Ltd.
Contact: Mr. Peng (Sales Manager)
Mobile: 191-6892-5687
Address: Heshui Kou Ruibang Industrial Zone, Guangming District, Shenzhen City


Positive and negative pressure defoaming oven

Time:2026/11/16 15:31:30Clicks:7
Suitable for: (Customization supported) PCB, FPC, TP, Optoelectronics (LED/LCD), New Energy, Chips, Semiconductors, Integrated Circuits, Thin Film Buttons, Camera, Mobile Phone, Communication, Hardware, Plastic, Touch Screen, Computer, Display, Capacitor IC、 Electronic components, new materials, chemicals, electronic components, lenses, cameras, module dispensing, post printing curing, and drying and baking of products in various industries such as IC, IGBT, lithium batteries, wafers, crystal oscillators, battery electrodes, connectors, and medical products.

Drying and baking of products for the crystal oscillator, battery electrode, connector, medical and other industries.

Item No.

Category

Specifications

1

Scope of Application

Dedicated model for high-temperature curing and bubble removal after die bonding and dispensing in wafer, semiconductor packaging and other industries.

2

Power

Total Equipment Power

7KVA

Power Supply

AC380V  3φ  50HZ  

Internal Dimensions

Pressure Tank Dimensions

Diameter 600×D600mm

Product Placement Area

W420*D600*H420mm

External Dimensions

W1380mm×D1600mm×1540mm (Reference Dimensions)

4

Equipment Structure

1. Single-chamber cylindrical structure design; the electrical control cabinet is located on the right side of the machine.

2. A sheath-type electric heater heats the slightly pressurized gas circulating inside the chamber; forced pressurization outside the furnace body together with automatic cyclic pressure relief then completes the air-exchange function and discharges waste gas, so as to keep the chamber pressure relatively higher than the external pressure. After the gas temperature inside the chamber reaches the set value, the heater stops heating automatically; when the chamber temperature drops below the set value, the heater starts automatically, thereby maintaining a stable temperature inside the chamber!

3. Vertical type; the fan is located at the rear of the cabinet and supplies air horizontally.

6. 1 set of heating control; the heater and the hot-air circulation system are located at the rear of the cabinet.

7. Circulating fan power 750W, 1 unit.

5

Materials and Standards

1. The interior is made of SUS304# 5.0mm stainless steel plate with concave iron reinforcement.

2. The exterior is made of SUS41# cold-rolled steel plate, with anti-static powder coating in wrinkle beige.

3. High-grade insulation cotton is used, with an insulation layer thickness of 90 mm and a heat-insulation board.

4. A high-temperature-resistant silicone gasket is used, with temperature resistance ≥260℃.

5. Heavy-duty rotary door latch with adjustable American-style hinge.

 

6

Pressurization System

1. Positive-pressure structure design; the chamber can withstand 8 kg of positive pressure.

2. Equipped with a pressure regulating valve, a pressure relief valve, a digital pressure gauge, gas pressure protection, and a high-pressure alarm with scheduled start/stop function.

3. Safety door protection: pressurization is impossible if the door is not closed tightly, and the door cannot be opened if the chamber pressure has not returned to atmospheric pressure; combination of manual and automatic pressure relief.

7

Negative-Pressure (Vacuum) System

Vacuum Range: −0.090~0.1Mpa

Pumping Speed: 8L/S.

Vacuum Degree ≤133pa

Leak Rate ≤0.001pa/L/S

6

Temperature Parameters

Temperature Range

Room Temperature∼250℃

Heating Rate

≥8℃/min

Over-Temperature Control

XZ-480 Over-Temperature Protector

Sensor Temperature Accuracy

±0.3℃

Uniformity

±2%℃

Cooling Rate

200℃→60℃≥6℃/min

Cooling Rate

At a common operating temperature of 200°C, ≤ room temperature + 10°C, except at the four sides of the oven door and at the exhaust port.

7

Temperature Control System

a. Utilizes 7-inch touchscreen operation, TFT LCD display, 1024*600 resolution, universal sensor input, 100ms sampling period, imported PID module, 0.1% control accuracy.

b. Paperless recording function, records 120 days of data, and temperature curves can be exported directly.

c. R232 communication, remote monitoring function.

d. Digital setting, cut-off temperature, constant-temperature timing alarm, over-temperature alarm and other functions. One set of over-temperature alarms per chamber.

e. 9999 timer; signal source: imported CA sensor rod ±0.5%; controlled output element: SSR contactless signal output.

8

Circulating Air System

Special air-path design for uniform heating temperature.

Long-shaft motor dedicated to hot-air ovens.

Heavy-duty stainless steel fan wheel.

9

Nitrogen System

Air inlet: equipped with an N2 flow meter to control the intake volume. Air inlet: 12mm.

Air Inlet: Air Ø1/2” or N2 Ø1/2”; Automatic Air Inlet/Outlet: Ø3/4”.

Nitrogen Concentration: 99.99%.

Oxygen Content ≤100ppm.

10

Safety Pressure Protection

1. Installation of a pressure regulating valve, a pressure relief valve, a digital pressure gauge, and a scheduled start/stop function.

2. Equipped with a scheduled exhaust function.

3. Equipped with gas pressure protection and high/low-pressure alarms.

4. Safety door protection: pressurization is impossible if the door is not closed tightly, and the door cannot be opened if the chamber pressure has not returned to atmospheric pressure.

5. Combination of manual and automatic pressure relief.

9

Electrical Safety Protection

1. Motor over-current protection, phase-sequence protector, leakage protector, control-circuit fuse, no-fuse breaker and contactor accessories all adopt Grade-1 products conforming to national standards.

2. Features an upper-limit over-temperature alarm function and a temperature/time hold function.

3. Can be set so that the motor continues to supply air after heating is cut off at the end of constant temperature.

10

Applicable Standards

Testing methods for electric heating equipment of the People’s Republic of China GB/T10066-2004, JB20033-2004, and Safety of electric heating installations GB5959.1-2005, GB150-1998 Steel Pressure Vessels

11

Internal Devices

Stainless steel finned heater

12

External Devices

1. Air inlet, air outlet, American-style hinge, rotary heavy-duty door latch, and four transport wheels installed.

2. The exhaust port is located at the top of the cabinet, and the opening size is adjustable.

13

Equipped

1. Comes with a 3m-long power cord.

2. Equipped with a volatile-matter treatment device to reduce volatile-matter buildup and lower the cleaning and maintenance effort.

3. Equipped with a circulating water-cooling device.

14

Warranty

One year of free after-sales service for replacement and repair of faulty parts after delivery.

15

Main Components

 

Details of Some Parts/Materials

Item No.

Name

Specifications/Model

Brand

Origin or Manufacturer

1

Motor

1/2HP

Jiacheng

Taiwan

2

Touchscreen

7-inch

Weintek

Taiwan

3

Temperature Module

 

Siemens

Germany

 

PLC

 

Siemens

Germany

4

Power Supply

 

MEAN WELL

Taiwan

5

SSR

25A

Xuanrong

Taiwan

6

Over-Temperature Limiter

XZ-480

Xinzhou

Dongguan

7

Heater

XZ-A-12-300

Xinzhou

Dongguan

8

Temperature Sensor

K Type

Minyang

Taiwan

9

Intermediate Relay

MY-4NJ

OMRON

Japan

10

Phase-Sequence Protector

XJ3-S

Finade

Zhejiang

11

Overload Protector

 

Schneider

Shanghai

12

Leakage Protector

 

     Schneider

Shanghai

13

Contactor

0810

Schneider

Shanghai

14

Digital Pressure Gauge

 

SMC

Japan

15

Pressure Relief Valve

 

AirTAC

Taiwan

16

High-Temperature Vacuum Valve

25mm

Keben

Shanghai

17

Vacuum Pump

VSV

Feiyue

Zhejiang

 

+86 191-6892-5687